Recent Searches

No recent searches

    Popular Articles

      Articles
      View all
        Topics
        View all
          Tickets
          View all
            no results

            Sorry! nothing found for

            List of readers that can be used with AgroVision mobile Sows

            Modified on Mon, 11 May at 9:35 AM

            Here you can find a list of devices that can be used with AgroVision sows Mobile. The devices are grouped based on type and purpose.



            All-in-one


            ProviderDevice name and modelEartag typeSettings in DeviceSettings in the mobileSettings in AgroVision Mobile Sows
            MBDCHHC 9000

            		LF or UHFNo settings. Setting done by providerNo settings. Setting done by provider1: Open setting
            2: Select "Use Bluetooth device".
            3: Select "All-in-one"
            Coppernic/MBDCC-One (2)LFNo settings. Setting done by providerNo settings. Setting done by provider1: Open setting
            2: Select "Use Bluetooth device".
            3: Select "All-in-one"


            Bluetooth/stickreader


             

            ProviderDevice name and modelEartag typeSettings in DeviceSettings in the mobile
            Settings in AgroVision Mobile Sows
            Allflex/AgridentAllflex LPRLFNo settings 1: Open Bluetooth on your mobile.
            2: Turn on the Bluetooth on your device and start search on your mobile.
            3: When the mobile finds a device LPR_#####, then click on it and select "Connect".
             4: The device might need a passkey. This is normally 0000 or 9999.
            1: Open setting
            2: Select "Use Bluetooth device".
            3: Select "RFID scanner"
            4: Find you reader LPR_##### from the list shown on screen.
              
            Allflex/AgridentAgrident AWR250LFMenu
            • Setup
            • Reader Settings
            • Set online mode
            • Set output format to [ ASCII + SCP]

            • Setup
            • Interface setup
            • Bluetooth
                   • Set Bluetooth Mode to [Slave Mode]            		1: Open Bluetooth on your mobile.
            2: Turn on the Bluetooth on your device and start search on your mobile.
            3: When the mobile finds a device AW250_####### , then click on it and select "Connect".
             4: The device might need a passkey. This is normally 0000 or 9999.            		1: Open setting
            2: Select "Use Bluetooth device".
            3: Select "RFID scanner"
            4: Find you reader AWR250_####### from the list shown on screen.
              
            Allflex/AgridentAgrident AWR300LFMenu
            • Setup
            • Reader Settings
            • Set online mode
            • Set output format to [ ASCII + SCP]

            • Setup
            • Interface setup
            • Bluetooth
                   • Set Bluetooth Mode to [Slave Mode]            		1: Open Bluetooth on your mobile.
            2: Turn on the Bluetooth on your device and start search on your mobile.
            3: When the mobile finds a device AWR300_######, then click on it and select "Connect".
             4: The device might need a passkey. This is normally 0000 or 9999.            		1: Open setting
            2: Select "Use Bluetooth device".
            3: Select "RFID scanner"
            4: Find you reader AWR300_####### from the list shown on screen.
              
            Allflex/Destron Allflex  RS420LFTo enter setup, hold black button for over three seconds.
            Green button, click to move to next line.
            Black button, click to select
            • Menu "Bluetooth"
            • On/Off set to "On"
            • Select Device set to "Slave"

            • Menu "Reader settings"
            • Tag storage mode set to "no storage"

            • Menu "General settings"
               • Protocol set to "Standard protocol"            		1: Open Bluetooth on your mobile.
            2: Turn on the Bluetooth on your device and start search on your mobile.
            3: When the mobile finds a device RS420_######, then click on it and select "Connect".
             4: The device might need a passkey. This is normally 1234 or 0000.            		1: Open setting
            2: Select "Use Bluetooth device".
            3: Select "RFID scanner"
            4: Find you reader RS420_##### from the list shown on screen.
              
            Datamars Tru-Test XRP2iLF1: Open "Settings"
            2: Select "Tag Reading"
            3: Select "Tag Format"
            4: In "Tag Format" select [Decimal2]            		1: Open Bluetooth on your mobile.
            2: Turn on the Bluetooth on your device and start search on your mobile.
            3: When the mobile finds a device XRS####, then click on it and select "Connect".
             4: The device might need a passkey. This is normally 0000 or 9999.            		1: Open setting
            2: Select "Use Bluetooth device".
            3: Select "RFID scanner"
            4: Find you reader XRS#### from the list shown on screen.
              
            TSLTSLUHFNo settings 1: Open Bluetooth on your mobile.
            2: Turn on the Bluetooth on your device by clicking the trigger and start the search on your mobile.
            3: When the mobile finds a device ######-EU-1128, then click on it and select "Connect".            		1: Open setting
            2: Select "Use Bluetooth device".
            3: Select "TSL reader"
            4: Find you reader ######-EU-1128 from the list shown on screen.
              

            Was this article helpful?

            That’s Great!

            Thank you for your feedback

            Sorry! We couldn't be helpful

            Thank you for your feedback

            Let us know how can we improve this article!

            Select at least one of the reasons
            CAPTCHA verification is required.

            Feedback sent

            We appreciate your effort and will try to fix the article

            Preview
            0 of 0